FEISHEN FAAT6000, Owner'S Manual, Page: 67 / 116

NOTE: After running the vehicle in water, it is critical your machine is serviced as
outlined in the maintenance chart see
“16. maintenance”
. The following areas need
special attention: engine oil, transmission oil, front and rear gear cases, and all grease
fittings.
CAUTION
If your ATV becomes immersed, take it to your dealer before starting the engine.
Major engine damage can result if the maching is not thoroughly inspected.
If it is impossible to take it to a dealer before starting, follow these steps outlined
below.
·
Move the ATV to dry land or at the very least, to water depth not more than 8 in.
(200 mm).
·
Turn the fuel valve to “OFF”.
·
Remove the spark plug.
·
Loosen the carburetor drain screw (1).