Fein CG15-125BL Inox Series, Instruction Manual

Page: 18 / 98

18
en
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power
plug.
This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the auxiliary handle
(figure 3).
Depending on the working manner, screw
the auxiliary handle right or left on the
power tool.
Mounting the wheel guard (figure 4).
For all work, please refer to
figure 13.
Insert the wheel guard ensuring that the
cams of the opening engage in the grooves
on the power tool.
Press the clamping lever and turn the wheel
guard to the required working position.
Allow the clamping lever to engage.
Mounting the cut-off wheel guard
For cut-off grinding opera-
tions, always work with the
cut-off wheel guard mounted.
Mounting takes place as described under
“Mounting the wheel guard”.
WARNING
Auxiliary handle
Fig. 3
2.
1.
WARNING
Protection guard
Fig. 4
2.
3.
1.
WARNING