12
en
Extension cable.
If the use of an extension
cord is required, its length
and conductor cross-section must be ade-
quate for the application in order to prevent
a voltage drop in the extension cord, power
loss and overheating of the power tool.
Oth-
erwise, the extension cable and power tool
are prone to electrical danger, and the
working efficiency is decreased.
Recommended dimensions of extension
cables at an operating voltage of 120 V –
single-phase a. c., with only one power tool
CG15 connected:
Intended use of the power tool:
Hand-guided angle grinder for dry grinding,
wire brushing and cutting of metal and stone
as well as for cutting tiles in weather-pro-
tected environments without the use of liq-
uid coolants, using the application tools and
accessories recommended by FEIN.
This power tool is also suitable for use with
AC generators with sufficient power output
that correspond to the Standard ISO 8528,
design type G2. This Standard is particularly
not complied with when the so-called dis-
tortion factor exceeds 10 %. When in
doubt, please refer to the generator instruc-
tion/specification guide.
Observe the operating instructions and the
national regulations for the installation and
operation of the AC generator.
The power tool is not intended for working
light metals and for polishing. The operator
is solely liable for any damage caused by use
not as intended for.
Generally recognized accident prevention
regulations and enclosed safety instructions
must be observed.
WARNING
Max. cable length, ft Max. cable length, m
≤
100
100
–200
200
–300
≤ 30
30
– 60
60
–100
Min. conductor size
A.W.G.
Min. conductor-
cross-section, mm
2
14
12
10
2.5
4.0
6.0
Summary of Contents for CG15-125BL Inox Series
