Feig Electronic Sensors VEK CN1-1, Operating Instructions Manual

Page: 8 / 16

Operating Instructions VEK CN1-1
8 12/11 FEIG ELECTRONIC GmbH
2.3.2 Modify/Correct Counter
Display State Settings
1234 Normal Operation
∧
or
∨ →
First digit flashing
→
modify counter
1234
one digit
flashing
Modify Counter
∧
or
∨ →
Digit + / - 1
∧
or
∨
1 sec.
→
Fast scroll
∧
or
∨
3 sec.
→
10´s
→
100´s
→
1000´s
M short
→
100´s
→
10´s
→
1´s
→
Cancel
M long
→
Skor
= saved
2.3.3 Set Relay Output manually to “Free” or “Occupied”
If, for any reasons, the relay output needs to be disabled the output can be manually set to maintain either the
always “FREE” or always “OCCUPIED” state.
Display State Settings
1234 Normal Operation
M 1 x short
→
Ouk
= Output status display
Ouk
Auko
occu
FrEE
(alternating)
Output Status display
•
Automatic
•
Occupied
•
Free
M short
→
next, next menu item
M long
→
End
= back to normal operation
∧
or
∨ →
select output state
Auko
occu
FrEE
(flashing)
Select Output status
∧ →
FrEE
→
Auko
→
occu
∨ →
occu
→
Auko
→
FrEE
M short
→
cancel changes
M long
→
Skor
= Output state saved
2.3.4 Display and Counter Reset
The inputs can individually count up to 9,999,999 and can individually be displayed or if necessary reset to zero.
Display State Setting
1234 Normal Operation
M 2 x short
→
Cnk1
= Input counter 1
:
M 5 x short
→
Cnk4
= Input counter 4
Cnk1
...
4
1234
(alternating)
display current
counter
0...9999
M short
→
continue, next menu item
∧ →
current input counter
∨ →
start input counter reset
Cnk1
...
4
1234
.
.
456
(continuously)
display input counter
10.000...9.999.999
0
flashing
Reset
M long
→
Skor
= reset input counter
M short
→
cancel reset
Note:
1. The open space or quantity of passed vehicle counter will not be affected during reset of any of the input
counter!
2. If display of one input counter is activated, it will not switch back to normal operating display by itself.
2.3.5 Reset all Counter
The open space and passed vehicle counter as well as the four (4) input counter can be reset at ones using the
following menu:
Display State Setting
1234 Normal operation
M 6 x short
→
rES
= Reset menu
rES Menu item Reset
M long
→
reset all counter
M short
→
back to normal operation without reset