background image

Operating Instructions 

 

VEK CN1-1 

 

2 12/11 

FEIG ELECTRONIC GmbH

 

 

 

 

 

 

Note

 

 
 

© Copyright 2011 by   

FEIG ELECTRONIC GmbH

  

    Lange 

Straße 

    D 

35781 

Weilburg 

 

The specifications contained in this document may be changed without prior notice. 

This edition replaces all earlier editions of the document. 

The information in this guide has been compiled to the best of our knowledge and in good faith. FEIG 
ELECTRONIC assumes no liability for the accuracy of the specifications in this guide. In particular FEIG 
ELECTRONIC cannot be held liable for consequential damages resulting from improper installation. 

Since errors can never be completely precluded in spite of all our efforts, we are always grateful for 
corrections and suggestions. 

The installation recommendations contained in this guide assume the most favorable circumstances. 
FEIG ELECTRONIC assumes no liability for perfect function of the traffic detector in a foreign system 
environment. 

Photocopying and reproduction of this guide in whole or in part as well as translation into other 
languages is not permitted without prior written permission from FEIG ELECTRONIC. Also prohibited is 
storage of this guide in whole or in part on modern storage devices for the purposes of further 
processing in data processing systems. 

 

 
 
 
 
 
 
 
 
 

Please read these operation instructions prior to install the equipment! 

Summary of Contents for Sensors VEK CN1-1

















Reviews: