Operating Instructions
VEK CN1-1
FEIG ELECTRONIC GmbH
12/11
7
2 Display and Setup
2.1 Display during normal operation
In normal operating mode you can have the display show either how many vehicles entered the car-park or how
many open spaces are left (see 1.4.1 Operating Mode/Switching point). The relay status is displayed with the LED.
Input states are indicated with the 4 dots in the display. Special states of the counting unit are shown directly.
Display
State
Number, for example
1234
Normal operation, Current counter
Number, all 4 numbers flashing
temporary voltage breakdown occurred
Number
/
occu
, alternating
Current counter, Output manually set to “occupied”.
Number
/
FrEE
, alternating
Current counter, Output manually set to “free”.
0000
Reset Input active (optional)
Dots
Input Status, left to right 1,2,3,4
LED on/off
Output relay status: activated = on/deactivated = off
Display off,
if unit was idle for 30 s
Power save mode
2.2 User Interface Buttons
The VEK CN1 digital counter is adjusted with three user interface buttons located on top of the unit. The display
shows the current menu and state of the setup. The buttons have following functionality:
Button Function
M
Short
Next Menu, next digit, Cancel settings.
(Mode) Long
Activate System menu, Save changes, exit menu.
∧
Short
Display value, inc 1
(Up)
Long
Display value, fast increment
∨
Short
Display value , decrement – 1
(Down) Long
Display value, fast decrement
Two simultaneously Cancel changes, back to operating mode.
The menu navigation is divided in a base menu and a system menu. During setup the flashing display signalizes
that the settings aren’t saved yet. If the unit was idle for 30 s the unit goes back to normal operating mode without
saving changes.
2.3 Base
Menu
The base menu contains all settings for the different operating modes. The existing counts can be displayed,
modified and reset the original stage. The relay output can be manually set to “FREE” or “OCCUPIED”
Display
Menu Setting
1234
Normal Operation, Current Counter
M Short
→
next, next menu item
Two buttons simultaneously or
M long
→
End
=back normal operation
∧
or
∨
→
change
M long
→
save
Ouk
Relay output manually
Cnk1
Input 1
Cnk2
Input 2
Cnk3
Input 3
Cnk4
Input 4
rES
Reset all Counter
2.3.1 Power
Failure
Display
Status Setting
1234
(flashing)
Return after power
failure
∧
or
∨
→
update open space counter
M
→
confirm existing counter
