Feig Electronic OBID classic-pro Series, Manual

Page: 108 / 126

OBID
®
classic-pro Manual ID CPR30.xx
FEIG ELECTRONIC GmbH Page 108 of 126 H01114-0e-ID-B.docx
8.3.2. Fujitsu (MB89R116)
IC manufacturer identifier: 0x08
Memory organization: 256 x 8 Byte = 2kBit
Number of blocks 256 (user area: 0 – 249)
Block size 8 byte
Command
Code Function Mode Comment
non-
addressed
addressed select
0x01 Inventory - -
0x02 Stay Quiet - -
0x22 Lock Multiple Blocks WR-OPTION = 0 or 1
0x23
Read Multiple Blocks
*
DB-Size = 8
Security Status is always
0x00
0x24
Write Multiple Blocks
**
DB-Size = 8,
WR-OPTION = 0 or 1
0x25 Select - -
0x26 Reset to Ready
0x27 Write AFI WR-OPTION = 0 or 1
0x28 Lock AFI WR-OPTION = 0 or 1
0x29 Write DSFID
0x2A Lock DSFID
0x2B Get System Information
0x2C
Get Multiple Block Security
Status
*
The Custom Specific Commands Read Multiple Blocks Unlimited [ 0xA5 ] will be used automatically by the
Reader.
**
The WR-OPTION will be set automatically by the FEIG Readers if the RW-OPTION parameter in “ 3.5.
CFG4: Transponder Parameters ” is set to “00: automatically set”. Up to two blocks of data
can be written for one request.
ASK SUB-CARRIER must be configured in the reader (see: “ 3.5. CFG4: Transponder Pa-
rameters ”)