26
ORIGINAL INSTRUCTIONS
•
When cut the wood,
put
the machine on the workpiece and
push
it along the wood.
To
switch off
the machine
•
First
take out of the machine from workpiece.
•
Then
release the On/Off switch.
Note: For safety reasons, the On/Off switch cannot be locked; it must
remain pressed during the entire operation.
Pressing the Laser Button
Note:
Laser light can cause severe eye damage. Never look directly into the laser
beam. Do not point the laser beam at other people or animals, either directly or through
reflective surfaces.
The laser feature on your saw is powered by two LR44 1.5V button batteries (installed).
The Laser feature clearly shows you an extended cut-line, even over debris on the work
piece.
•
Turn it on with the laser light ON/Off switch right before cutting.
•
Turn it off immediately after use to conserve battery and laser life.
