28
ORIGINAL INSTRUCTIONS
Maintenance and Cleaning
•
Before any work on the machine itself (e. g. maintenance, tool change, etc.) as
well as during transport and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating the On/Off switch.
•
For safe and proper working, always keep the machine and ventilation slots
clean.
The retracting blade guard must always be able to move freely and retract
automatically. Therefore, always keep the area around the retracting blade guard clean.
Remove dust and chips by blowing out with compressed air or with a brush. Saw blades
that are not coated can be protected against corrosion with a thin coat of acid-free oil.
Before use, the oil must be removed again; otherwise the wood will become soiled.
Resin and glue residue on the saw blade produces poor cuts. Therefore, clean the saw
blade immediately after use.
TRANSPORT
The contained lithium ion batteries are subject to the Dangerous Goods Legislation
requirements. The user can transport the batteries by road without further requirements.
When being transported by third parties (e. g.: air transport or forwarding agency),
special requirements on packaging and label must be observed. For preparation of the
item being shipped, consulting an expert for hazardous material is required.
Dispatch batteries only when the housing is undamaged. Tape or mask off open
contacts and pack up the battery in such a manner that it cannot move around in the
packaging. Please also observe possibly more detailed national regulations.
DISPOSAL
The machine, rechargeable batteries, accessories and packaging
should be sorted for environmental-friendly recycling. Do not dispose of
power tools and batteries/rechargeable batteries into household waste!
