25
ORIGINAL INSTRUCTIONS
•
Tighten wing bolt again.
When setting the cutting depth, use the reference mark to the side of the cutting-depth
scale.
Adjusting the Cutting Angle
It is best to place the machine on the face side of the blade guard.
•
Loosen wing bolt.
•
Tilt the saw side-wards.
•
Adjust the desired setting at the scale.
•
Tighten wing bolt again.
Note:
For bevel-cuts, the cutting depth is smaller than the setting indicated on the
cutting-depth scale.
Switching On and Off
To
start
the machine
•
First
push the lock-off button for the On/Off switch
•
Then
press the On/Off switch and keep it pressed.
