24
ORIGINAL INSTRUCTIONS
Operation
Mounting the Extraction Adapter
Before any work on the power tool, remove the battery. Fasten the extraction
adapter to the dust port without tools.
The extraction adapter may not be mounted when no external dust extraction is
connected.
Otherwise the extraction channel can become clogged.
Do not connect a dust bag to the extraction adapter.
Otherwise the extraction system can become clogged. To ensure optimum extraction,
the extraction adapter must be cleaned regularly.
Adjusting the Cutting Depth
•
Adjust the cutting depth to the thickness of the work-piece. Less than a full tooth of the
blade teeth should be visible below the workpiece.
•
Loosen wing bolt. For a smaller cutting depth, pull the machine from the base plate;
for a larger cutting depth, push the machine toward the base plate.
•
Adjust the desired cutting depth at the cutting-depth scale.
