Feider Machines FSDT75, User Manual

Page: 20 / 28

1.
Remove the fuel tank cap, drain the fuel to empty the tank. Check the tank inside for any
foreign materials. If any, wipe clean such materials.
2.
Pull out the fuel filter with wire through the fuel filling port.
3.
If the fuel filter surface is contaminated, clean it with gasoline.
NOTICE: Follow the method specified by each local authority for disposing the gasoline
used for cleaning the fuel filter.
NOTICE: Replace the fuel filter if it is excessively contaminated.
After checking, cleaning or replacing, insert the fuel filter into the fuel pipe and fix it with the hose
clamp. Reset the fuel filter in the fuel tank and tighten firmly the fuel tank cap.
Inspecting bolts, nuts and screws and other parts
Retighten loose bolts, nuts, etc. Check for fuel and oil leakage.
Replace damaged parts with new ones for safety operation.
Cleaning engine, cooling air inlet
Cleaning engine, cooling air inlet
Keep engine clean by wiping down with a cloth rag.
Keep the cylinder fins free of dust or dirt. Dust or dirt adhering to the fins may cause engine
overheat and piston seizure.
Blowing air is taken in from the air inlet vent. When airflow drops down during operation, stop
engine and inspect the air inlet vent for any blockages. Clean it if necessary. Such a blockage
may cause overheat and damage the engine.
Others maintenance
Any maintenance of adjustment work that is not included and described in this manual is
only to be performed by Authorized Service Agent.
Storage
WARNING: When draining the fuel, stop the engine and wait for the engine to cool down.
Failure to do so may cause burns or fire.
CAUTION: When you store the machine for a long time, drain all fuel from the fuel tank
and carburetor, and keep it at a dry and clean place.
Drain fuel from the fuel tank and carburetor before storing the
machine as follows:
20