Feider Machines FSDT75, User Manual

Page: 12 / 28

4.
Lift the choke lever to the closed position.
5.
Pull out slowly the starter handle till feeling compression. Then pull it strongly.
NOTICE: Never pull the rope to the full extension.
NOTICE: Return the starter knob gently into the housing. Otherwise released starter knob
may hit your body or it may not rewind appropriately.
6.
When the engine starts, down the choke lever to open position.
►
1. Throttle trigger 2. Stop control lever
Transporting the blower
CAUTION: When transporting the blower, be sure to stop the engine.
NOTE: Open the choke lever fully before pulling the throttle.
NOTE: In cold temperature or when the engine is not warm enough, never open the choke lever
suddenly. Otherwise, the engine may stop.
7.
Warm-up for 2 to 3 minutes with engine speed idle or low.
8.
Warm-up is complete when quick engine acceleration from low rpm to full throttle is felt.
NOTE: If the operator keeps pulling the starter handle several times with the choke lever
left in the “CLOSE” position, the engine may be difficult to start because of flooding of the
fuel.
In case of flooding of the fuel, remove the spark plug and pull the handle several times
rapidly to discharge any excess fuel. Dry the spark plug electrode.
12