Feider Machines FSDT75, User Manual

Page: 13 / 28

When the engine is warm (warm start)
1.
Put the blower on a flat surface.
2.
Push the primer pump several times.
3.
Make sure that the choke lever is open.
4.
Stump the pedal with your right foot, and hold the top of the unit cover with left hand to
prevent the engine from moving.
5.
Pull out slowly the starter handle till feeling compression. Then pull it strongly.
6.
When the engine is difficult to start, open the throttle by about 1/3.
Stopping the engine
For tube throttle model:
Release the throttle trigger and then set the stop control lever to “O”
position.
►
1. Throttle trigger 2. Stop control lever
Adjusting shoulder strap
1.
Adjust the shoulder strap to a length that is comfortable to work while carrying the blower.
To fasten the strap, pull the end of the strap downwards.
►
1. Shoulder strap
To loosen the strap, pull up the end of the fastener.
13