Feider Machines FSDT75, User Manual

Page: 21 / 28

1.
Remove the fuel tank cap, and drain fuel completely. If there is any foreign materials
remaining in the fuel tank, remove it completely.
2.
Pull out the fuel filter from the refill port using a wire.
3.
Push the primer pump until fuel is drained from there, and drain fuel coming into the fuel tank.
4.
Reset the filter to the fuel tank, and securely tighten the fuel tank
cap.
5.
Then, continue to operate the engine until it stops.
6.
Remove the spark plug, and drip several drops of engine oil through the spark plug hole.
7.
Gently pull the starter handle so that engine oil will spread over the engine, and attach the
spark plug.
8.
Keep the machine with its carry handle upside.
9.
Keep the drained fuel in a special container in a well-ventilated shade
8. CE DECLARATION
BUILDER SAS
ZI, 32 rue Aristide Bergès
– 31270 Cugnaux - France
Tel: +33 (0)5.34.502.502 Fax: +33 (0)5.34.502.503
Declares that the machines:
PETROL BLOWER
Model: FSDT75
Serial No.: 20210759856-20210760005 / 20210760006-20210760155
The people name holding the technical file
：
M. Olivier Patriarca
Have been designed in compliance with the following standards:
EN15503:2009/A2:2015
ENS ISO 14982:2009
And in accordance with the following directives:
Directive Machine 2006/42/EC
EMC directive 2014/30/EU
Emission directive 2016/1628/EU
Noise directive 2000/14/CE Annexe V & Directive 2005/88/CE
Cugnaux, 28/05/2021
Philippe MARIE / PDG
21