Feider Machines FDL125, Owner'S Manual

Page: 17 / 25

Unplug the power allow the saw blade to cool down.
y
Press the spindle lock button, lock the driving shaft with a help of a spindle lock as in Fig 1.
y
Unscrew Blade bolt with the help of an Allen key in Clockwise Direction as in Fig 2.
The spindle lock button may be actuated only when the saw spindle is at a standstill. Otherwise,
the power tool can be damaged.
y
Unscrew the Blade bolt with an Allen key turning in Clockwise Direction.
y
Open the lower guard as Fig 3.
y
Slightly rotating around while lift up the blades pack to remove the 2 in 1 Twin Blade Pack from
the spindle as Fig 4.
MOUNTING THE SAW BLADE (Fig 5, Fig 6, Fig 7)
For mounting the blades, it is best to place the machine with the blade B printing side facing the
user.
Unplug the power allow the saw blade to cool down.
y
Open the lower guard as in Fig 5.
y
Place the 2 in 1 Twin Blade Pack on to the spindle and rotate around the blades to make sure the
three driving bosses on the blades to match the three notches on the output spindle; while the
blades pack well seated, rotate the two blades together could feel the gear collision as Fig 5, Fig 6.
y
Press spindle lock button and with the help of Allen key tighten the Blade bolt in counterclockwise
direction as Fig 7.
y
Release Spindle lock button and turn the Allen key to drive the blade rotating a couple turns, if the
blades can rotate smoothly; Remove the Allen key, the machine is ready for you to use.
17