Feider Machines FDL125, Owner'S Manual

Page: 11 / 25

Note: To be accurate, an estimation of the level of exposure to vibration experienced during a
given period of work should also take into account the times when the tool is switched off and when
it is running but not actually doing the job. This may significantly reduce the exposure level over the
total working period.
FUNCTIONAL DESCRIPTION
Read all safety warnings and all instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury. While reading the operating instructions,
unfold the graphics page for the machine and leave it open.
INTENDED USE
This product with the supplied TCT blade Pack is intended for cutting Metal, Wood, Plastic; with
Diamond blade Pack is intended for cutting Stone and Tile.
Two specially designed blades spin in opposite directions, providing smoother finished cuts with less
vibration and kickback than any single blade saw!
This tool is providing effortless cutting with its portability, can do your work faster and with
negligible sparks. Your MULTIPURPOSE PORTABLE SAW has many built-in convenience features
for fast, efficient cutting. These features include an innovative 2 in 1 Twin Blade System where the
two blades accurately
spin in opposite directions to provide smooth, clean cuts with less vibration
and kickback.
OPERATION
STARTING A CUT
Observe the correct mains voltage! The voltage of the power source must agree with the
voltage specified on the nameplate of the machine.
a) DANGER: If the cord hangs up on the workpiece during a cut, release the trigger switch
immediately. Unplug the saw and move the cord to prevent it from hanging up again.
b) DANGER: Using the saw with a damaged cord could result in serious injury or death. If the
11