Feider Machines FDL125, Owner'S Manual

Page: 20 / 25

MAINTENANCE AND SERVICE
Maintenance and Cleaning
Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and ventilation slots clean.
The retracting blade guard must always be able to move freely and retract automatically.
Therefore, always keep the area around the retracting blade guard clean. Remove dust and chips
by blowing out with compressed air or with a brush.
Saw blades that are not coated can be protected against corrosion with a thin coat of acid-free oil.
Before use, the oil must be removed again; otherwise the wood will become soiled.
Resin and glue residue on the saw blade produces poor cuts. Therefore, clean the saw blade
immediately after use.
If the machine should fail despite the care taken in manufacturing and testing procedures, repair
should be carried out by an after-sales service center.
WARNING! Important instructions for connecting a new 3-pin plug to the 2-wire cable. The wires in
the cable are colored according to the following code:
Do not connect the blue or brown wire to the earth terminal of the plug.
Important: If for any reason the moulded plug is removed from the cable of this power tool, it must
be disposed of safely.
20