F E I B A O V E L O X X L
9
31. Glue the air bottles into the fuselage using silicone or
epoxy.
Figure 31
32. Second air bottle on the right side of the fuselage.
Figure 32
33. Locate all the tank parts. Check the holes in the tanks
and open if needed to fit the stoppers. Also blow out the
insides of the tanks completely clean of all dust.
Figure 33
34. Clean up the end of each tube if needed, blow out any
dust or shavings.
Figure 34
35. Assemble the stoppers as shown.
Figure 35
36. Add the clunks and lines, secure each end with a tie
wrap.
Figure 36
37. Bend up the vent tubes on all three stoppers.
Figure 37
38. Install the stoppers in the tanks. Be sure to mark
which lines is fuel and which are vent. Pressure tests
each tank for leaks in a bucket of water or a sink.
Figure 38
Summary of Contents for Velox XL
Page 25: ...25...
