FeelTech
20
FY2300H Series User’s Manual
Set Duty Cycle (Square)
Duty cycle is defined as the percentage that the high level takes up in the
whole period (as shown in the figure below). This parameter is only available
when square is selected.
The setting range of duty cycle is limited by the “FREQ” setting. Please refer
to “
Waveform Characteristics
” in “
Specifications
”. The default value is 50%.
Press
DUTY
button to highlight duty cycle value. Then use Arrows button
and ADJ Knob to set the value. Press Arrows button to move the cursor and
rotate ADJ Knob to set the value.
The setting range of duty cycle is 0.1%-99.9%
；
Press ADJ Knob under duty cycle setting status will initial the value to 50%.
