FeelTech
6
FY2300H Series User’s Manual
2
LCD
2.4 inch TFT
（
320×240
）
color LCD. Operation instruction please
check chapter
“
User Interface
”
.
3
Manu
Buttons
F1~F5 buttons are matched with Manu displayed on the LCD.
Press corresponding button to activate submenu represented.
4
ADJ Knob
— Rotate the ADJ Knob to increase or reduce the current value
indicated by the cursor.
—
Frequency unit can be changed by Press ADJ Knob under
Frequency value setting status.
— Press ADJ Knob to Start/Stop sweep under Sweep interface.
5
Arrows
Press Arrow buttons to select figure which you want to edit
when setting values of each parameter.
6
Output
Channels
Control CH1 output. Press it to switch to CH1 parameter
setting interface.
—
Press it to turn on CH1 output with current
configuration. The indicator will illuminate.
—
Press it again to turn off CH1 output and the indicator
will extinguish.
Control CH2 output. Press it to switch to CH2 parameter
setting interface.
—
Press it to turn on CH2 output with current
configuration. The indicator will illuminate.
— Press it again to turn off CH2 output and the indicator
will extinguish.
