mr
.
steam
®
C L U B T H E R A P Y
Installation, Operating & Maintenance Manual
_________________________________________________________________________________________
5
Provide unions as required
to facilitate installation and
disconnect of piping
Steam
Generator
Field installed
power supply
Field installed
steam piping
Drain Valve should
be closed when
AutoFlush is not
installed
Control cables run in 1” conduit
(located behind the wall)
Steam Head (shown with optional
acrylic shield) See page 7 for
Steam Head Installation information
Remote Sensor
see page 16
CT SteamStop
®
Control. See page
17 for installation
information.
iTempo/Plus
®
or iSteam
Control. See
page 16
Field installed
water supply line
IMPORTANT:
Locate the
remote sensor in a location
representative of the desired
steambathing temperatures.
Do not locate the control above
or near the steam head or
direct steam emissions.
Typical MrSteam
®
Installation
When installing the optional
AromaSteam, install a downward
facing 90-degree T in the steam
piping. See the AromaSteam
Installation Manual for
complete information.
FOR ILLUSTRATIVE PURPOSES ONLY
Some components may be omitted or altered for clarity. Do not use for
wiring, repair or other purposes not related to component identification.
