4
®
Installation Instruction
Installation Instruction
Wireless Receiver Installation
The control can be located up to 60 feet from the
wireless receiver. Construction materials may affect
the communication between the control and the
receiver. Test the range of the AirTempo. It may
be necessary to change the location of the wireless
receiver to improve the range. Contact MrSteam
technical service for an optional 30 or 60 foot cable.
Using the 3 foot cable provided, plug one end into
the steam bath generator and the other end into the
AirTempo.
Attach the dongle on a wall adjacent to the steam
generator using the screw provided.
Steam
Generator
Wireless
Receiver
Mounting on Glass
When installing AirTempo on glass a peel and stick film is provided on pages
20-21 and may be used as a mask for a clean look from behind the glass.
Steam
Generator
3 ft. Cable Standard
(optional 30’ or 60’
cable available)
Wireless Receiver
AirTempo Control
Surface or Flush Mount
Steam Head
All drawings for illustrative purposes only.
IMPORTAN Do not rest the dongle on the
steam generator, the metal case of the
generator may shield the RF signal.
IMPORTAN The control features an integral
temperature sensor. Locate the control in a
location representative of the desired steam
bathing temperatures.
DO NOT
locate the
control above or near the steam head or direct
steam emissions.
To avoid
unintentional steambath
operation, do not locate the
control where other controls,
accessories, shower heads,
valves, body sprays or similar
within the shower could cause
confusion or interfere with the
MrSteam control’s intended use
and function.
