Feel Good mr. steam AirButler, Installation, Operation & Maintenance Manual

Page: 4 / 37

3
®
Installation Instructions
Installation Instructions
3/4”
3-5/8”
3-5/8”
1-5/8”
4-7/8”
7/8”
Dimensional Information for the AirTempo
BOX CONTENTS:
U ˆÀ/i“«œÊœ˜ÌÀœ
U iVœÀ>̈ÛiÊ/Àˆ“
U >LiÊ­ÎÊvÌ°®
U 7ˆÀiiÃÃÊ,iViˆÛiÀ
U >ÌÌiÀˆiÃÊ­Ó®
U œÕ˜Ìˆ˜}Ê-VÀiÜÃÊ­Ó®
U -Ìi>“ i>`
U /ÕLiʜvÊ-ˆˆVœ˜iÊ-i>>˜Ì
U -ÕÀv>Viʜ՘ÌÊ >ޜ˜iÌ
U "ܘiÀ½ÃÊ>˜Õ>
Drawings for illustrative purposes only
Wireless Receiver AirTempo
(shown with decorative trim)
Installation Instructions for AirTempo
STEP 2
The AirTempo ÊVœ˜ÌÀœÊV>˜ÊLiÊÃÕÀv>ViʜÀÊyÕà Ê
mounted according to personal preference.
Flush mount components are sold separately
(104232RD & 104232SQ). Contact a MrSteam
Ài«ÀiÃi˜Ì>̈ÛiʈvÊ>ÊyÕà ʓœÕ˜ÌʎˆÌʈÃʘii`i`]Ê
see page 22.
Surface Mount AirTempo
U ,i“œÛiÊÌ iÊÃÕÀv>ViʓœÕ˜ÌÊL>ޜ˜iÌÊvÀœ“
the back of the AirTempo Control.
U ,i“œÛiÊEÊ`ˆÃV>À`ÊÌ iÊÀii>ÃiÊ«>«iÀÊ̜
expose the adhesive liner.
U ˜ÃÕÀiÊÌ iʓœÕ˜Ìˆ˜}ÊÃÕÀv>ViʈÃÊVi>˜ÊEÊ`ÀÞ°
U *>ViÊÌ iÊL>ޜ˜iÌʜ˜ÊÌ iÊÜ>Êˆ˜ÊÌ iÊ`iÈÀi`ʏœV>̈œ˜°
U 7>ˆÌÊ£xʓˆ˜ÕÌiÃÊLivœÀiÊ«>Vˆ˜}ÊÌ iÊVœ˜ÌÀœÊœ˜ÊÌ iÊL>ޜ˜iÌÊ̜
ensure the adhesive is secured
IMPORTANT
7UGVJGUETGYCPFCPEJQTRTQXKFGFVQUGEWTG
VJGDC[QPGVVQVJGYCNNCUTGSWKTGFHQTTQWIJQTWPGXGPYCNN
UWTHCEGU6JGUWTHCEGOQWPVDC[QPGVUWRRQTVUVJGYGKIJVQH
VJG#KT6GORQEQPVTQN
STEP 1
Determine the desired installation location of the control. The AirTempo
controls are designed to be installed inside or outside the steam room
as a matter of personal preference. If the control is installed outside the
steam room a Remote Temperature Probe part number MSTS must be
installed inside the steam room.
IMPORTAN
See installation instructions for the MSTS Temperature
Probe (pgs.10-12) before rough-in or installation of control.
If the control is installed inside the steam room the control must be located:
• 4-5 feet above the floor near the bather seating area.
• On a vertical wall
• Mounting surface should be clean and dry
The control features an integral temperature sensor. Locate the control
in a location representative of the desired steam bathing temperatures.
Do not locate the control above or near the steam head or direct steam
emissions. Locating the controls near the steamhead or near direct
steam emissions may result in poor steam room temperature control.
DO NOT mount on grout/caulk lines.
The control can be located up to 60 feet from the wireless receiver.
Construction materials affect the communication between the control
and receiver. Test the range of the AirTempo. It may be necessary to
change the location of the wireless receiver to improve the range.
Contact MrSteam technical service for an optional 30 or 60 foot cable.
STEP 2