E3981 VHSS
8
REMOVE CASE OFF OF FRONT OR BACK OF SKID ONLY
PULL SKID AWAY FROM CASE
AND GENTLY SET CASE ON FLOOR
5.2.1
Removing Packaging Material
Remove bubble wrap and packing material for all shelves and panel, brackets, etc. If it is
necessary to remove tape residue from plastic materials, use cleaning compounds
recommended in the cleaning section of this manual.
5.2.2
Lifting and Moving the Case
Caution:
Do not push or pull against the glass air deflector on front of case. Doing
so can cause the glass to break. Do not push or pull on side glass or pull
on base panel. Doing so will break glass or pull out panel mounting
screws. Care must be taken not to damage the case when removing it
from the skid or moving the case.
5.3
SINGLE CASE INSTALLATION (STAND ALONE UNITS)
Leveling the Case
A wrench is included to aid in adjusting leg levelers.
Check the left-to-right level of the case along front of plastic air deflector retainer.
Check the front-to-rear level of the case along the interior ends of the case.
