E3981 VHSS
10
(6)
JOINING KIT INSTALLATION (VHSS TO VHSS)
6.1
INSTALLATION FOR JOINED CASES (LINEUPS)
6.1.1
Join heated to heated (VHSS to VHSS)
1.
Remove all Shelves, display deck, interior back panel(s), exterior back(s), front and
rear base panel, and ceiling.
2.
Position the right or left most unit in the desired position for the lineup to start, and level
this case.
3.
Push the 2
nd
case next to the 1
st
and line them up as closely as possible.
4.
Adjust the leveling legs of the 2
nd
case until the units and joining holes align with each
other.
5.
Using (7) holes noted below, bolt units together with the supplied hardware, and attach
joining trim to remove the gap between the decks in the joined units. Re-use the screws
in the uprights, as well as the self-drilling screws provided with the kit.
JOINING HOLES
