- 41 -
ITRSS Models
1. LIFT UP DOOR
2 SWING BOTTOM OUT
1. LIFT UP DOOR
2 SWING BOTTOM OUT
INNER DOOR CATCH
INNER DOOR
CATCH SLOT
INNER DOOR UPPER TRACK
OUTER DOOR
UPPER TRACK
OUTER DOOR
LOWER TRACK
INNER DOOR
LOWER TRACK
OUTSIDE DOOR SET
1.
Start with the outer outside door and lift the door upward until the bottom edge of door clears
the lower track and then swing the bottom of the door outward and down out of upper track.
2.
Remove the outer inside door using the same procedure.
3.
The inner door set can then be removed using the same procedure starting with the inner outside
door followed by the inner inside door.
4.
Reverse this procedure for door reinstallation starting with the inner inside door followed by the
inner outside door. Check that the doors slide freely.
5.
Replace the outside inner door and the outside outer door. Be sure to slide the inner door catch
into the inner door catch slot for each door.
Note: None of the doors are not interchangeable and they must be replaced in the same
location that they were removed from.
Summary of Contents for ITD Series
