NOTE
Powering multiple devices with a common con-
trol lead may cause one or more units to briefly
remain functional after signal power is removed.
For example, due to the high input filter capaci-
tance, a strobe supply can briefly supply the
current required to operate a low current device
such as an LED. If necessary, use a relay to iso-
late devices with large filter capacitors. See fig-
ure 3-2 for the schematic; all components/wires
are user-supplied.
A.
Mode Inputs.
There are three prioritized mode of operation
available with mode three being the highest priority.
Mode 3 (WHT/RED) will override Mode 2 (RED) and
Mode 2 will override Mode 1 WHT/ORN). One of the
available flash patterns can be programmed to each
mode input. Default configuration is Mode 3 Random
Flash, Mode 2 Quad Flash and Mode 1 Single Flash.
Programming is covered in Section 3-4 and 3-5. To ac-
tivate a mode, apply 12VDC to a mode input wire. See
figure 3-1 for proper fusing.
B.
Steady Burn Red.
When the SMART VECTOR™ SL is equipped
with a Steady Burn Red led module, applying 12VDC to
the Orange wire will cause that module to operate when
any mode input is selected.
C.
Intersection Mode.
When 12VDC is momentarily applied to the
(WHT/YEL) wire, it will cause the flash rate of the se-
lected mode input to double. When 12VDC is applied
again the flash rate will return to normal.
D.
Right Alley.
Applying 12VDC to the Right Alley (Green)
wire will cause the Right Alley lights to illuminate.
E.
Left Alley.
Applying 12VDC to the Left Alley (White)
wire will cause the Left Alley lights to illuminate.
290A5310-02
CUDATRIOPTIC
+12V
CONTROL LEAD
(12V SIGNAL ACTIVATED)
RELAY
FUSE
STROBE SUPPLY
Figure 3-2.
F.
Takedowns.
Applying 12VDC to the Takedowns (Gray)
wire will cause the Takedowns lights to illuminate.
G.
Jog Left.
Applying 12VDC (via a user-supplied mo-
mentary switch) to the yellow wire while alleys or take-
downs are illuminated will cause the Smart Pod(s) to
step to the left. If the switch is pressed and released, the
Smart Pod(s) will jog left one step. If the switch is held
down, the Smart Pod(s) will continue to step left until
the switch is released
H.
Jog Right.
Applying 12VDC (via a user-supplied momen-
tary switch) to the black wire while alleys or takedowns
are illuminated will cause the Smart Pod(s) to step
to the right. If the switch is pressed and released, the
Smart Pod(s) will jog right one step. If the switch is held
down, the Smart Pod(s) will continue to step right until
the switch is released
3-3. FUNCTION ACTIVATION – SIGNALMASTER.
NOTE
Jumpers are factory installed for External Sig-
nalMaster Controller. Refer to table 3-1 and fig-
ure 3-1 for proper connections.
A.
SignalMaster Internal Controller.
1.
See figures 3-3 & 3-4. Ensure that jump-
ers JP2 & JP7 are installed as indicated
2.
When 12VDC is applied to one of the
control wires the corresponding SignalMaster function
will activate (see table 3-1). The first seven inputs are
prioritized, with “Left” (WHT/BRN) being the highest
priority and “Warn 4” (WHT/GRN) being the lowest pri-
ority. The highest priority input that has 12VDC applied
will override any other input that has12VDC applied.
When using a three position progressive slide switch for
“Left”, “Center” and “Right” functions, “Left” is connect-
J17
R30
Q2
+
R40
H3
H2
H4
F7
R55
+
+
Q -
F6
J12
+
P -
O - + N -
C28
F5
D10
C33
F4
F3
C20
+
Q6
+
D4
+
F2
U5
F1
C21
J10
R41
Q8
-
J13
+
M -
L -
U8
+ K - + J
J14
GG
HH
E
FF
F
H
G
NM -
U9
UPPER TAKEDOWNS
ALLEY
-
-
J15
+
+
Q9
J16
ORG
WHT
+ SR -
R46
Q7
J11
R29
Q4
ALLEY
J9
A
+
C10
D2
-
U1
D C B
R6
R15
+
J1
BB CC DD
J2
+
JP4
MADE IN U.S.A.
UNIVERSITY PARK, IL
FEDERAL SIGNAL CORP.
2005245A-
-
J3
JJ
Q1
-
-
-
+ - KK +
1 2
JP3
3
R7 R8
LL +
MM
-
+
R9
NN
-
+ -
GND
LF
H1
NSM
SM
JP5
U2
-
OO
J4
+
PP +
-
+
-
U3
-
J5
+ - LR +
-
RF +
RR +
R20
R22
R19
R21
C49
D21
RSB
R51
R52
J18
C46
SR
+
-
J19
C47
C42
D19
D18
C43
D20
R53
SIGMAST INPUTS
FSB
C48
J20
U10
R47
C44
R48
C45
MAIN PROG
J21
R50
JP7
R49
R54 D22
C50
C24
R33
R32
D17
D12
D14
D15
D11
D16
U6
D7
D5
D6
D8
D9
C38
R42
C34
D13
R43
C39
C35
R36
C29
R37
C30
R31
R17
R18
C22
C16
C23
C17
R25
C11
R26
C12
R35
R34
C37
R45
C41
R44
C40
C36
R39
R38
C31
C32
1
U7
R24
D3
C25
C19
C18
C26
R28
C14
R27
C13
JP6
Y1
C15
C27
C9
R23
R16
PATTERN INPUTS
J7
RIGHT
ALLEYS
RIGHT
TAKEDOWNS
LEFT
J6
Q3
LEFT
C5
R11
C6
R12
R1
C1
R2
C2
D1
R5
JP1
C8
R14
C7
R13
JP2
SM PROGRAM
R3
R4
C3
C4
J8
C52
C51
U4
R10
290A5310-03
Figure 3-3.
-3-
Summary of Contents for SMART VECTOR SL
Page 12: ......