Federal Signal Corporation Navigator Lightbar, Installation, Operation And Service Instructions

Page: 21 / 32

21
Navigator Lightbar
Installation, Operation, and Service Instructions
Table 8 Lightbar functions for 20-conductor cable
Wires Function Description
White/
Black
Takedown
Ap12 Vdc provides white Steady Burn light to the front. Overrides Front
Light Cutoff.
Green Dim
Ap12 Vdc dims the lightbar 50 percent. Dimming does not affect on the
rotating heads.
Red/
Black
Rear Flood Ap12 Vdc activates lights that have white to the rear in Flood Mode.
Black/
White
Work lights
Ap12 Vdc activates the work lights if configured for this option when the
lightbar is ordered.
Black Cruise Ap12 Vdc activates the Cruise Mode of the lightbar.
Orange Pattern Change Touching the wire to +12 Vdc changes the pattern and stores it in memory.
Red/
Green
Warn 1
Ap12 Vdc activates the SignalMaster heads in the Warn 1 pattern. This
option is only available if the lightbar is configured for this SignalMaster when the
lightbar is ordered.
Red SignalMaster Left
Ap12 Vdc activates the left SignalMaster pattern. The option is only
available if the lightbar is ordered with a SignalMaster configured at the factory. Left
is the input with the lowest SignalMaster priority.
White/
Red
SignalMaster Right
Ap12 Vdc activates the Right SignalMaster pattern. The option is only
available if the lightbar is ordered with a SignalMaster configured at the factory.
Right has priority over Left.
Blue/
Red
SignalMaster
Center
Ap12 Vdc activates the Center SignalMaster pattern. The option is only
available if the lightbar is ordered with a SignalMaster configured at the factory.
Center has priority over Left and Right.
Blue Mode 1
Ap12 Vdc activates the lightbar in Mode 1. The lightbar can be programmed
to have one of 28 flash patterns in this mode. Mode 1 is the lowest priority.
Blue/
White
Mode 2
Ap12 Vdc activates the lightbar in Mode 2. The lightbar can be programmed
to have one of 28 flash patterns in this mode. Mode 2 overrides Mode 1.
Black/
Red
Mode 3
Ap12 Vdc activates the lightbar in Mode 3. The lightbar can be programmed
to have one of 28 flash patterns in this mode. Mode 3 is the highest priority and
overrides Modes 2 and 1.
Green/
White
Front Light Cutoff Ap12 Vdc cuts off light to the front.
Red/
White
Steady Burn Ap12 Vdc activates in the front lightheads in Steady Burn Mode
Orange/
Black
Rear Light Cutoff Ap12 Vdc cuts off light to the rear.
Blue/
Black
Front Flood Ap12 Vdc activates lights that have white to the front in flood mode.
White White Light Enable
When calling for the right of way, a vehicle responding to an emergency is permitted
to have white light. Ap12 Vdc activates the white flashing LED heads and
may turn the rotators white depending on the lightbar configuration.
Green/
Black
Driver Side Alley
Ap12 Vdc activates the Driver Side Alley light if configured for this option
when the lightbar is ordered.
Orange/
Red
Passenger Side
Alley
Ap12 Vdc activates the Passenger Side Alley light if configured for this
option when the lightbar is ordered.