19
Navigator Lightbar
Installation, Operation, and Service Instructions
Table 7
Lightbar functions for 10-conductor cable
Wires
Function
Description
Brown
Mode 1
Ap12 Vdc activates the lightbar in Mode 1 (Primary
Mode) has priority over Mode 2 (Secondary Mode). The
lightbar can be programmed to have one of 30 flash patterns in
this mode.
Blue
Mode 2
Ap12 Vdc activates the lightbar in Secondary Mode.
The lightbar can be programmed to have one of 30 flash
patterns in this mode.
Red
Steady Burn Red
Ap12 Vdc activates any steady burn modules in the
lightbar. The lightbar is configured upon request for this option.
Yellow
White Light Enable
When calling for the right of way, a vehicle responding to an
emergency is permitted to have white light. Ap12 Vdc
activates the white flashing LED heads and may turn the
rotators white depending on the lightbar configuration.
Gray
Flood Mode
Ap12 Vdc activates Flood Mode, which turns on lights
that are configured for Steady White.
Orange Pattern Selection
Touching the wire to +12 Vdc changes the pattern and stores it
in memory.
Black
Front Light Cutoff
Ap12 Vdc cuts off forward flashing lights.
Green
Dim
Ap12 Vdc dims the lightbar 50 percent. Dimming has
no effect on the rotating lightheads.
White
Rear Light Cutoff
Ap12 Vdc cuts off
light to the rear.
Violet
Work lights
Ap12 Vdc activates the work lights if configured for this
option when the lightbar is ordered.
Summary of Contents for Navigator Lightbar
Page 2: ......
