Federal Signal Corporation Informer Series, Installation And Operation Manual

Page: 9 / 28

Informer Series Tone Alert Receiver
5
General Description

Signal to Noise based squelch circuit, does not open receiver in high radio noise
environments that is, near computers etc.

Programmable for wide or narrow band.

Programmable RF, Single Tone, Two-Tone, DTMF, CTCSS, and CDCSS (DPL)
decoding

Re-programmable over RS232 port

Volume control, monitor and reset buttons with diagnostic LEDs

Ramp-up tones for Warble, Steady, Beep, and Hi-Lo (with firmware 2.3.0.1 or
later)
Optional Features

Programmable MSK decoder compatible with Federal’s Commander Software.

Programmable EAS decoder for decoding NOAA radio SAME code alerts.

600 Ohm audio output and two (2) SPDT relay outputs.

Windows
®
-based programming software
NOTE
: The MSK and EAS decoders are not available simultaneously in the same
unit. All other options can be used together.