14
Informer Series Tone Alert Receiver
Operating Instructions
MERGEFORMAT
Configuring
the
Informer-IPFORMAT
General
Description
ations
Operating Instructions
General Information
You must pre-program all the Informer TAR’s functions correctly and test before
placing into service.
The following sections describe the various features and functions of the Informer
TAR. Please refer to the following figure.
Figure 3 Informer TAR Keypad
Power Supply
Your Informer TAR comes with a power supply. Keep it plugged in at all times.
When the Informer is plugged in and receiving power, the Power LED displays a
steady green light. The Informer TAR also comes with a sealed valve regulated
rechargeable battery. The battery requires continuous charge in order to maintain its
effectiveness. In the event that AC power to the Informer TAR is lost, the green
Power LED on the unit begins to flash to indicate the use of battery power.
IMPORTANT
: The Informer TAR should not be turned off; therefore, the unit must
remain connected to the power supply to avoid depleting the battery.
Connect the Informer TAR to a 9 VDC, 500 mA power supply, which is provided
with the unit. Allow the battery to charge for at least 24 hours initially and after a
complete discharge before relying on the battery backup feature.
