Informer Series Tone Alert Receiver
21
Replacement Parts
Replacement Parts
The Informer uses one of these two types of connectors: one with slots or one without
slots. Match the 8-pin connector of your Informer to the picture below and order the
corresponding part number.
Table 12 Replacement Part Numbers
Picture
Part Number
13900406A-08
140372A-08
Getting Service
Refer to the
Programming and Radio Alignment Manual for option I-SW
for
alignment instructions. Refer to an authorized Federal Signal Service center for radio
alignment and servicing.
If you are experiencing any difficulties, contact Federal Signal Customer Care at:
800-548-7229 or 708-534-3400 extension 5822 or Technical Support at:
800-524-3021 or 708-534-3400 extension 7329 or through email at:
[email protected] For instruction manuals and information on related
products, visit: http://www.alertnotification.net/
