18
Configuring Informers Using the Web Interface
Informer-IP Series C
Federal Signal www.fedsig.com
The Home page displays a summary of the current configuration settings for the
RTU. The Navigation Menu (blue hyperlinks on left) is used to access other System
Management web pages. Use the Help hyperlink to access the user manual from any
web page.
NOTE: It may take up to 1 minute to update all the fields on the Home page after
applying power or resetting the RTU. Click the Home menu to refresh and update the
page.
Fields
Description
Model
The RTU model of the device. This field will be blank for a few
minutes following power up or master reset.
RTU Number
The RTU’s assigned identity.
Description
The RTU’s description.
SmartMsg
Server
The RTU’s assigned default SmartMsg server.
SmartMsg
Failover List
The RTU’s SmartMsg Failover List. This field is blank until the unit
successfully connects to the server and retrieves failover list.
SIP Status
The RTU’s SIP connection status. When the RTU is registered with a
SIP server, the status will be Online and the SIP server’s IP address
will be displayed. Offline will be displayed when the RTU is not
registered with a SIP server.
MAC Address The MAC Address of the device.
IPv4
Addresses
The RTU’s assigned IPV4 address or its domain name.
DIGI Firmware
Version
The firmware version of the DIGI Connect ME 9210 module.
RTU Firmware
Version
The firmware version of the RTU.
