manualshive.com logo in svg

Federal Signal Corporation Informer-IP C Series, Setup, Program, And User Manual

Share
Download
Federal Signal Corporation Informer-IP C Series Setup, Program, And User Manual Download Page 29

29

Configuring Informers Using the Web Interface

Setup, Program, and User Manual 

Federal Signal www.fedsig.com

4. Uploading Certificates

Use the Certificates page to upload certificate files to support secure SIP TLS 

communication. Certificate files are optional, and if provided allow for CA certificate 

validation. 

File type

Filename

CA certificate

ca-cert.pem

Device SSL certificate cert.pem
Device private key

key.pem

To upload a certificate file:
1.  Select Certificates.

The Certificates page appears.

Fields

Description

Browser

Choose the new ca-cert.pem, cert.pem or key.pem file.

Upload

Upload the new file.

2.  Click Browse to select the new 

ca-cert.pem, cert.pem, or key.pem file.

3.  Click Upload to upload the new file.
4.  Reboot the device for the changes to take effect.

Summary of Contents for Informer-IP C Series







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands