64
Configuring Informers Using Commander Software (Optional)
Informer-IP Series C
Federal Signal www.fedsig.com
A Warning dialog box appears.
3. Click OK. The Activation Hot Keys dialog box turns red, which indicates that the
hotkeys are now programmable.
NOTE: Commander remains in programing mode for 15 seconds.
4. Click the key you want to configure.
The Program Hotkey dialog box appears.
Fields
Description
Name
Enter the name of the button that will appear on the Activation Hot Key
dialog box. Names must be 19 characters or fewer.
Save
Updates the hotkey configuration. A confirmation message appears.
Quit
Closes the Program Hotkey dialog box without updating the hotkey
configuration. A warning message appears.
5. Enter a button name in the Name field at the bottom of the dialog box.
6. Select the desired site or zone that the hotkey actives from the Individual or Zone
lists.
