21
Basic Setting
Description, Installation, and Configuration Manual
Federal Signal
www.fedsig.com
Making a call
1. Pre-dialing: enter the phone number and pick up the
handset.
2. Direct dialing: lift the handset and enter the phone number.
3. Handsfree: enter the phone number and press
or vice
versa.
4. Headset: enter the phone number and press or vice
versa.
5. Designated line: press the line key, enter the phone number,
and press the dial key.
Accepting a call
1. With the handset: pick up the handset.
2. With a headset: press .
3. With the handsfree: press
.
Placing a call on hold
1. Press key or Hold soft key, and the caller is put on hold.
2. To retrieve the call press key or the Resume soft key.
NOTE: With more than one active call, select the desired call
with the navigator keys and use the corresponding soft key to
hold or resume.
Three-party conference
1. Once in line with the first caller, press
key or Conf soft
key; the first caller is put on hold.
2. Call the second number.
3. After the second call is established, press
key or Conf
soft key to set up the conference.
