DEFIBRILLATOR MONITOR
Mod. 3850B-BIPHASIC - USER MANUAL
Page 49 of 63
ECG
Trouble Probable
cause Action
Selected ECG curve isn’t properly
viewed, and Lead Off message appear.
One of ECG electrodes is loose.
Check that the electrodes are perfectly
attached and make contact with the
patient’s skin. If necessary replace
(the) electrode (s).
Check that each pins of patient wire
are correctly connected to its
corresponding electrode.
If problem persists, then motherboard
is the cause, Send the equipment to
our Customer Service for repair.
One of the electrodes wires is
disconnected from electrode.
One of the electrodes wires is faulty.
Faulty motherboard.
Selected ECG curve isn’t viewed, it’s
shows a straight line.
The ECG connecting wire is
disconnected from the defibrillator.
Check patient wire connection to the
equipment.
ECG input signal greater than ± 5mV,
this can occur during defibrillation.
Wait a few seconds until the signal is
restored automatically.
Faulty motherboard.
Send the equipment to our Customer
Service for repair.
Selected ECG curve isn’t viewed and
message “ECG Saturated” appear.
There is a very powerful source of
electrical noise emission in patient
vicinity.
Separate the patient and equipment of
the noise source.
Equipment isn’t connected to ground
because it uses an adapter plug.
Connect the equipment to the facility,
without adapters, to a grounded outlet.
Contact the After sale customer
assistance of
feas
ELECTRÓNICA
to
supply the appropriate wire for
installation.
The equipment isn’t connected to
ground because it uses a base of
multiple sockets ungrounded.
In case of need to use a multi-socket
basis, make sure that it´s earthed and
connected to the facility. Contact After
sale customer assistance of Feas
Electronica to providing multiple
sockets base suitable for installation.
The facility has no grounding or is
faulty.
Contact a licensed electrician to
normalize installation and outlets, and
that they have normalized ground.
None of the above.
Send the equipment to our Customer
Service for repair.
