47
DOME WITH THE ALUM AIR INSULATION ONLY:
Dome
WITH
the skylight window
1. Start the installation of the Alum Air Insulation from Level 2 and work your way down.
2. Install all panels on Level 2 before installing the level below. Pay attention to the correct positioning of the
panels - panels with ventilation openings need to be in line with the vents in the dome cover.
3. Once complete, move to Level 3. Undo the bottom bolts from Level 2 and place the next layer of insulation
on top of the previously installed level 2. The top of level 3 will overlap the bottom of level 2. Pay attention
to the correct positioning of the panels - panels with porthole openings need to be in line with the
porthole openings in the dome cover.
4. Repeat the process until you finish with Level 5.
5. The Openable Level 1 of the Alum-Air insulation is to be installed at the end of the process. Remove the
top bolts from Level 2 install the bungee eyelets on top of the previously installed Level 2. Screw the plastic
cap and cap nut back on.
Alum-Air Insulation
Level 1
Level 2
Level 3
Level 4
Level 5
Level 2
Level 3
Level 4
Level 5
Drawing 26
Alum Air Insulation Cross Section
- Dome with Skylight Window
Summary of Contents for GLAMPING 20
Page 1: ...ASSEMBLY MANUAL GLAMPING 20 30 40 50...
Page 2: ......
Page 34: ...34 Map 1A CAMPING DOOR FG20 INSULATION P3 ENTRANCE...
