FDomes GLAMPING 20, Assembly Manual

Page: 12 / 53

12
PVC GROUND MEMBRANE INSTALLATION MANUAL
NOTE:
By now, you should have your dome’s legs and base plates in position and screwed together, all along
the
previously drawn perimeter of the dome. If you purchased the dome together with the Interior Modules, you
need to install the PVC Ground Membrane now, as you will be placing the modules on top of this membrane.
If you purchased the dome as a stand-alone unit without our Interior Modules, you can install the PVC Ground
Membrane once the whole dome is constructed.
NOTE:
The diameter of the PVC Ground Membrane is larger than the diameter of your dome’s footprint.
NOTE:
If you didn’t purchase the Interior Modules, steps 4 and 5 do not apply.
STEP 1:
Unfold the PVC Ground membrane within the perimeter
of the dome.
STEP 2:
Position the membrane evenly across the whole footprint
of the dome following its shape. It is produced in a way
which resembles the shape of the dome therefore you
may need to rotate it.
STEP 4:
If you will be installing the FDomes Interior Modules,
carefully pierce holes to let the media connections
through (water, sewage, electricity, ventilation). Make
sure that your openings in the membrane are just big
enough to let the connections through.
STEP 3:
Flip any excess material over the edges of the base plates
- make sure it is evenly distributed around the perimeter of
the dome.