FDomes GLAMPING 20, Assembly Manual

Page: 31 / 53

31
The chimney must be placed under one of the three
slots provided in the membrane. Choose the location
that suits you best.
The chimney collar should be placed in the socket,
between two layers of the membrane, on each side of
the slot. After the chimney pipe with the collar is secured
in the slot, connect additional external pipes and finish
with a chimney topper.
The stove kit includes the stove and an exhaust
pipe that is to be connected to the chimney. We
advise to secure the flooring using a rectangular
piece of a metal sheet, tiles, (inflammable floor
material which is as low as possible) at least twice
as big as the stove. Install the said floor protection
metal sheet to your flooring system and place the
stove on it. Connect the straight exhaust pipe to
your stove’s chimney.
STOVE & CHIMNEY ASSEMBLY MANUAL
WARNING :
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage.
For assistance or additional information consult
an authorized technician.
The Stove and Chimney set is designed to be put on the
same level as the feet and baseplates of the dome -
below the actual floor in the dome, on top of the deck/
concrete slab itself. If you decide to put the stove on
top of the floor which you have built inside the dome,
you need to account for the fact that the stove will be
effectively raised off the deck, therefore the chimney
will be too long. If this is the way in which you wish to
install the stove and chimney, please notify us before
ordering and we will adjust the set accordingly. If you
are planning to install the stove directly on the deck/
concrete slab and below the level of the floor inside the
dome, be sure to leave enough room for the bottom
stove service doors to open.
NOTE
:
We advise setting the stove on a sheet of metal / fire
proof tile so that the deck underneath the stove is
protected from any hot coals that may fall out.
Scan to watch
a video manual