Recommended separation distances between
portable and mobile RF communications equipment and the
[EQUIPMENT or SYSTEM]
.
The
[EQUIPMENT or SYSTEM] i
s
intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the
[EQUIPMENT or SYSTEM]
can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the
[EQUIPMENT or SYSTEM]
as recommended below, according to the maximum
output power of the communications equipment.
Rated maximum
output power of
transmitter
(W)
Separation distance according to frequency of transmitter
(m)
150 KHz to 80 MHz
P
d
167
.
1
=
80 MHz to 800 MHz
P
d
167
.
1
=
800 MHz to 2.5 GHz
P
d
333
.
2
=
0.01
0.117
0.117
0.233
0.1
0.369
0.369
0.738
1
1.167
1.167
2.333
10
3.689
3.689
7.379
100
11.667
11.667
23.333
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
FCC ID: 2ADNQFTC11BBT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
Following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received ,including interference that may cause undesired
operation
