Figure 11
Shut Down
After measurement, press button “ON/OFF” to turn off the device. The device will be
automatically power off after 1 minute of none use.
Voice Function
The device with voice function can speak out in the following state:
The device will speak out the prompt that “keep silence to take a cuff at the same
height with your heart ” when the measure begin.
The device will speak out the displayed blood pressure (systolic and diastolic
pressure), heart rate after each measurement finish.
The device will speak out the last time displayed memory blood pressure (systolic
and diastolic pressure), and heart rate when reading memory result.
Note:
The voice function is ONLY for models FT-C21Y-V, FT-C22Y-V, FT-C23Y-V,
FT-C24Y-V, FT-C11B-V, FT-C12B-V.
UART connection and Blue Tooth Function
The UART connection model is FT-C11B-UR
Operation Method:
★
Install the APK accordance with the communication protocol into the signal
receiving device such as mobile phone.
★
Use cable to connect receiving device with the blood pressure monitor which with
UART port .
★
Activate the receiving device and let it be in stand- by status for blood pressure
measuring.
