Close the battery cover by gently sliding it into the compartment and pressing it into
place..
See Figure 3.
Note
：
：
：
：
When the LCD display shows “Low Battery” signal
,the batteries must be replaced for
accurate readings.
See Figure 4
Do not use rechargeable batteries (voltage 1.2V). They are not suitable for this product,
can damage the monitor and will cause inaccurate readings to be obtained.
Remove the batteries if the monitor will not be used for six month or longer to avoid
damage from the possibility of leaking batteries.
All the measurements will remain in the memory should the batteries become drained,
removed, or replaced.
Figure 3 Figure 4
NOTE: AC adapter is optional for power supply. Only use the adapter provided by
manufacturer, that is complying with EC60601-1 standard requirements. Do not
touch the AC adapter with wet hand while it is working. Do not tangle the power cords
of the adapter during measuring process. The adapter is part of the blood pressure
monitor. Unplug the AC adapter from power outlet to isolate the device from supply mains
Clock Adjusting and Unit Change
Press the “SET” button for 5 seconds during the device is turned off, the number of the
YEAR will begin to blink on the LCD display. Press the “” ” button to advance the YEAR
displayed. When you have reached the correct date, press the “SET” button and release.
(Don't keep on clicking on the 'SET' button without being released during programming.)
When the “SET” button is
