FCA US Voyager 2021 Owner'S Manual Download Page 164

Page: 164 / 392

162

MULTIMEDIA

Units

When the Units button is pressed on the touchscreen, the system displays the different measurement options. The selected unit of measurement will

display in the instrument cluster display and Navigation system (if equipped). The available settings are:

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

Control Screen Timeout

This setting allows you to set the Control Screen to turn off automatically

after five seconds or stay open until manually closed.

Phone Pop-ups Displayed In Cluster

This setting will display smartphone notifications and messages in the

Instrument Cluster Display.

Setting Name

Description

Setting Name

Description

This setting will change the unit of measurement on the display to US.

Metric

This setting will change the unit of measurement on the display to Metric.

Custom

This setting changes the “Speed” (MPH or km/h), “Distance” (mi or km),

“Fuel Consumption” (MPG [US], MPG [UK], L/100 km, or km/L),

“Pressure” (psi, kPa, or bar), “Temperature” (°C or °F), and “Capacity”

(Gal [US], Gal [UK], or L) units of measurement independently.

21_RUV_OM_EN_US_t.book Page 162

Summary of Contents for Voyager 2021









































































































































































































































































































































































































Search results

Summary of Contents for Voyager 2021

Reviews:

Related manuals for Voyager 2021

Brands by name

Popular brands

FCA US Voyager 2021, Owner'S Manual

Search results

Summary of Contents for Voyager 2021

Reviews:

Related manuals for Voyager 2021

Brands by name

Popular brands