FCA US Voyager 2021 Owner'S Manual Download Page 139

Page: 139 / 392

STARTING AND OPERATING

137

ARK

ENSE

ISPLAY

When the vehicle is in REVERSE and an

obstacle has been detected, the warning

display will turn on indicating the system status,

and remain on until the vehicle is moved out of

REVERSE.
The system will indicate a detected obstacle by

showing a single arc in one or more regions

based on the obstacle’s distance and location

relative to the vehicle.

If an obstacle is detected in the center rear

region, the display will show a single solid arc in

the center rear region and will produce a

one-half second tone. As the vehicle moves

closer to the obstacle, the display will show the

single arc moving closer to the vehicle and the

sound tone will change from slow, to fast, to

continuous.

If an obstacle is detected in the left and/or right

rear region, the display will show a single

flashing arc in the left and/or right rear region

and will produce a fast sound tone. As the

vehicle moves closer to the obstacle, the

display will show the single arc moving closer to

the vehicle and the tone will change from fast to

continuous.

21_RUV_OM_EN_US_t.book Page 137

Summary of Contents for Voyager 2021









































































































































































































































































































































































































Search results

Summary of Contents for Voyager 2021

Reviews:

Related manuals for Voyager 2021

Brands by name

Popular brands

FCA US Voyager 2021, Owner'S Manual

Search results

Summary of Contents for Voyager 2021

Reviews:

Related manuals for Voyager 2021

Brands by name

Popular brands