FCA US Voyager 2021 Owner'S Manual Download Page 83

Page: 83 / 392

GETTING TO KNOW YOUR VEHICLE

Seat Storage Bin Cover Emergency

Release Lever

As a security measure, the Seat Storage Bin

Cover has an Emergency Release Lever built

into the latching mechanism.

Storage Bin Cover Emergency Release Lever

NOTE:

In the event of an individual being locked inside

the storage bin, the storage bin cover can be

opened from inside of the bin by pushing on the

glow-in-the-dark lever attached to the storage

bin cover latching mechanism.

Coat Hooks — If Equipped

Coat hooks are located along the headliner for

the second and third row seating positions. The

coat hook load limit is 10 lb (4.5 kg). Exceeding

the recommended load limit can cause the coat

hooks to break or disengage from the vehicle.

Coat Hook

CREENS

— I

QUIPPED

Sun screens are available for second row

seating windows. The screens store in the sill

trim panels, and the tops of the windows are

equipped with hooks that the sun screens

attach to when pulled out.

Sun Screen Retracted

CAUTION!

The storage bin cover must lay flat and be

latched to avoid damage from contact with

the front seat tracks, which have minimal

clearance to the cover. If the storage bin

cover is left in the open position, front seat

adjustment may damage the cover.

21_RUV_OM_EN_US_t.book Page 81

Summary of Contents for Voyager 2021









































































































































































































































































































































































































Search results

Summary of Contents for Voyager 2021

Reviews:

Related manuals for Voyager 2021

Brands by name

Popular brands

FCA US Voyager 2021, Owner'S Manual

Search results

Summary of Contents for Voyager 2021

Reviews:

Related manuals for Voyager 2021

Brands by name

Popular brands