FCA US Voyager 2021 Owner'S Manual Download Page 161

Page: 161 / 392

MULTIMEDIA

159

Press the Apps button, then press the
Settings button on the touchscreen to

display the menu setting screen. In this mode,

the Uconnect system allows you to access all of

the available programmable features.

NOTE:



Only one touchscreen area may be selected

at a time.



Depending on the vehicle’s options, feature

settings may vary.

When making a selection, press the button on

the touchscreen to enter the desired menu.

Once in the desired menu, press and release

the preferred setting option until a check mark

appears next to the setting, showing that setting

has been selected. Once the setting is

complete, either press the Back Arrow button

on the touchscreen to return to the previous

menu, or press the X button on the touchscreen

to close out of the settings screen.

Pressing the Up or Down Arrow button on the

right side of the screen will allow you to toggle

up or down through the available settings.

KeySense

The vehicle’s KeySense settings are protected

by a unique four-digit PIN, which the vehicle

owner creates when accessing the specific

settings for the first time. This four-digit PIN can

only be reset by an authorized dealer.
After pressing the KeySense button on the

touchscreen, and entering the KeySense PIN,

the following settings will be available:

Setting Name

Description

Forward Collision Warning Sensitivity — If Equipped

This setting will change the distance at which the Forward Collision

Warning (FCW) alert sounds. The “Medium” setting will have the FCW

system signal when an object is in view, and the possibility of a collision is

detected. The “Near” setting will have the FCW system signal when the

object is closer to the vehicle. The “Far” setting will have the FCW system

signal when an object is at a far distance from the vehicle.

Forward Collision Warning — If Equipped

This setting will turn the Forward Collision Warning (FCW) system on or

off. The “Warning Only” setting will provide only an audible chime when a

collision is detected. The “W Active Braking” setting will provide

an audible chime and apply some brake pressure when a collision is

detected.

21_RUV_OM_EN_US_t.book Page 159

Summary of Contents for Voyager 2021









































































































































































































































































































































































































Search results

Summary of Contents for Voyager 2021

Reviews:

Brands by name

Popular brands

FCA US Voyager 2021, Owner'S Manual

Search results

Summary of Contents for Voyager 2021

Reviews:

Brands by name

Popular brands