FCA US Voyager 2021 Owner'S Manual Download Page 131

Page: 131 / 392

STARTING AND OPERATING

129

The following indicators should be used to

ensure that you have properly engaged the

transmission into the PARK position:



Look at the transmission gear position

display and verify that it indicates the PARK

position (P), and is not blinking.



With brake pedal released, verify that the

gear selector will not move out of PARK.

REVERSE (R)

This range is for moving the vehicle backward.

Shift into REVERSE only after the vehicle has

come to a complete stop.

NEUTRAL (N)

Use this range when the vehicle is standing for

prolonged periods with the engine running. The

engine may be started in this range. Apply the

parking brake and shift the transmission into

PARK if you must exit the vehicle.

DRIVE (D)

This range should be used for most city and

highway driving. It provides the smoothest

upshifts and downshifts, and the best fuel

economy. The transmission automatically

upshifts through all forward gears. The DRIVE

position provides optimum driving

characteristics under all normal operating

conditions.

If the transmission temperature exceeds

normal operating limits, the transmission

controller may modify the transmission shift

schedule, reduce engine torque, and/or expand

the range of torque converter clutch

engagement. This is done to prevent

transmission damage due to overheating.
If the transmission becomes extremely hot, the

“Transmission Temperature Warning Light” will

illuminate, a warning message will appear in the

instrument cluster, and the transmission may

operate differently until the transmission cools

down.
During cold temperatures, transmission

operation may be modified depending on

engine and transmission temperature as well

as vehicle speed. This feature improves warm

up time of the engine and transmission to

achieve maximum efficiency. Engagement of

the torque converter clutch, and shifts into

EIGHTH or NINTH gear, are inhibited until the

transmission fluid is warm

page 130. Normal

operation will resume once the transmission

temperature has risen to a suitable level.



DO NOT race the engine when shifting from

PARK or NEUTRAL into another gear range,

as this can damage the drivetrain.

CAUTION!

(Continued)

WARNING!

Do not coast in NEUTRAL and never turn off

the ignition to coast down a hill. These are

unsafe practices that limit your response to

changing traffic or road conditions. You might

lose control of the vehicle and have a

collision.

CAUTION!

Towing the vehicle, coasting, or driving for any

other reason with the transmission in

NEUTRAL can cause severe transmission

damage.
If Recreational Towing

page 154.

If Towing A Disabled Vehicle

page 303.

21_RUV_OM_EN_US_t.book Page 129

Summary of Contents for Voyager 2021









































































































































































































































































































































































































Search results

Summary of Contents for Voyager 2021

Reviews:

Related manuals for Voyager 2021

Brands by name

Popular brands

FCA US Voyager 2021, Owner'S Manual

Search results

Summary of Contents for Voyager 2021

Reviews:

Related manuals for Voyager 2021

Brands by name

Popular brands