79
System manual
VAIE 4000 Compact Systems
EN
VAIE
4000
Label
Application
See panel
Notes
Output
Relay outputs
Panel for configuring the outputs.
To go from one output to another
(from 1 to 2)
, press ‘Next’ or
‘Prev.’
Activate or de-activate (On/Off) the
type of event to be associated with
the output in question by pressing
the appropriate buttons.
To leave the screen, press
‘
Escape
’.
Local microphone
Local microphone
Panel for configuring the output
zone default for emergency
messages and emergency or
broadcast live calls.
Activate or de-activate (On/Off) the
emergency calls default.
Press ‘Enable’ to enable the use
local microphone for broacast
calls. If enabled, the default
setting can be selected in the
set>
PAGING CALLS
menu (page 23).
To leave the screen, press
‘
Escape
’.
Control input
Controlled input contacts
Panel for configuring the controlled
inputs. To go from one input to
another
(from 1 to 4)
, press
Next
or
Prev.
Press
Mode
to select one of the
following modes:
-
Not active input
(not used)
-
Reset input
(reset input)
-
Message input > Edit zone
Setting of the messages for the
zone (Evac / Alert / No message)
-
Ext. fault
(for the signalling of an
external equipment failure to be
allowed).
Press
Control
to enable or disable
control over the concerned input.
Press
Logic
to set the logic
typology attributed to the
concerned input, choosing
between:
-
Positive
(active high)
-
Negative
(active low)
Press
Trans.
to choose the
operating mode:
-
Level
: the messages are
activated only for as long as the
input is activated.
-
Transition
: activation of the
messages starts with activation of
the input, but can be stopped only
by means of manual resetting or a
reset input.
Press ‘
Escape
’ to exit the screen.
Output relay 1
Escape
On
Fault
Evac.
Alert
Mic.
Prev.
Next
Broad
Logic
Off
Off
Off
Off
Positive (active high)
>>
Output
NOTE:
The Transition setting can only be
enabled if
Message input
mode
is on
.
